本設備擬用于2級污染工業環境中的過電壓II類應用
(如IEC 60664-1中所定義),海拔高達2000米(6562英尺),無需降額。
本設備不適用于居住環境,可能無法為無線電提供足夠的保護
此類環境中的通信服務。
該設備作為開放式設備提供。它必須安裝在適當設計的外殼內
將存在的特定環境條件,并適當設計,以防止
帶電部件的可訪問性。外殼必須具有適當的阻燃性能,以防止或盡量減少火焰蔓延,
符合5VA的火焰蔓延額定值,如果是非金屬材料,則應獲得批準。外殼內部必須
只能使用工具訪問。本出版物的后續章節可能包含有關特定
符合某些產品安全認證要求的外殼類型額定值。
除本出版物外,請參見以下內容:
•工業自動化布線和接地指南,羅克韋爾自動化出版物1770-4.1,用于附加安裝
要求
•NEMA標準250和IEC 60529(如適用),用于解釋外殼提供的防護等級



The card provides 8-bit access to objects in the short address space and 8- and 16-bit access to objects in the standard address space. The VME master selects whether a particular bus cycle accesses short, standard, extended, or long (extended and long are not used on the card) address spaces, and the type of access, through the use of the address modifier codes. The card decodes these address modifier codes and determines the object to be accessed. In addition to selecting one of four spaces available on the VMEbus, address modifier codes also select: • Whether the master is making a supervisory or non-privileged access • Whether the access is to program or data space (for all but short address space accesses) • Whether it is to be a single-object or block access The card can respond to address modifier codes 0x03D, 0x039, 0x02D, and 0x029. Supervisory or non-privileged data accesses may be made to standard address space (0x03D and 0x039 respectively). Supervisory or non-privileged accesses may be made to short address space (0x02D and 0x029 respectively). An access to the card with an address modifier code that is not supported causes a VMEbus error. Position 7 of the card's DIP switch selects whether only supervisory accesses or both supervisory and non-privileged accesses are permitted. The following table shows the switch positions.